1. Netlike, woven material of fiber or wire.
2. To become entangled.
3. To fit together closely, to interlock.
Gypsum wallboard joint tape made with fiberglass.
In between, intermediate, intervening; passing an interest from a principal to a second party and then to a third party.
Used in outdoor lighting systems or service drops, the electrical wiring is supported by high strength wire.
High carbon content coal, which is difficult to ignite or burn; similar to graphite in composition and structure.
High luster, heat and electricity conducting. Easily molded class of chemical element, with a crystalline structure. Very durable, they include gold, copper, iron and steel, etc.
Use of an electric arc to provide heat to cut metal.
Rigid, flexible metal conduit with a wire bundle, consisting of individually insulated conductors covered by a flexible spiral-wound later of metal or tough paper. Also referred to as BX Cable.
Single metal cubicle type switch, which holds all the necessary equipment to control a circuit.
Siding trim, of metal, which has the appearance of a mitered corner.
Called Q-deck, this permanent form for concrete is made of a ribbed steel sheet for reinforcement and strength.
Preformed piece of sheet metal used to protect the roof shingles from water backflow, by guiding water runoff to drip off the edge of the roof.
Also called plywood edge clips, these metal clips reach between adjacent edges of plywood panels to connect them.
Ornamental iron or welded metal used in fences for both security and decoration.
Screen-like structural supports for plaster or mortar, made of thin metal sheet, stretch and stamped with a pattern.
General term used for metal strips used to connect many items.
Metal powder, often bronze or aluminum, added to paint to make it both reflective and increase its protectiveness.
Microscopic study done to determine the quality of welds by checking cross sections carefully. Material failures are also studied to see why and how they occurred.
Scientific field of analyzing, working with and alloying metals.
Burning through metal quickly by use of a torch to produce heat and oxygen, together with an oxidizable powder, which increases the chemical reaction.
Paint with a base of oil or oil with alkyd mixed with compounds, such as zinc chromate, which prevents rust and corrosion.
Most often used in commercial buildings, these preformed steel framing units are galvanized or aluminum coated to protect against corrosion. Studs can range in thickness for use in non-loadbearing partitions to loadbearing parts. The metal makes the wall completely non-combustible.
Combination studs have a diagonally bent wire that is welded to rolled steel flanges and forms the web of the stud to be used to attach metal lath with wire ties or clips.
Light gauge metal stud formed like a channel with a turned in edge and a serrated flange, to keep the screws from moving as they are installed.
Trim, L and U shaped, used on the exposed edges of drywall for protection and an appearance of completion.
Sedimentary or igneous rock, which has undergone a change as a result of pressure, heat or chemical, making combinations of colors that, are twisted and curved to form interesting patterns. Often used as flagstone pavers, for retaining walls or siding, when cut into sections.
1. Measuring device for electrical current or water.
2. Basic unit of length in the metric system, equal to 39.37 inches.
Metal box, which holds the electrical meter on the wall while it measures and records usage of electricity in a building.
Piece of equipment through which the service conductor runs.
Receptacle for the electric power meter.
Land surveying method of precisely describing land by using terms of shape and boundary dimensions.
Natural gas often used for home heating purposes.
Decimal system of weights and measures with the basic units being: The gram (.0022046 pound) of weight. The meter (39.37 inches) of length. The liter (61.025) of capacity.
Machine threads measured in metric units.
Metric weight which equals 1000 kilograms or 2204.62 U.S. pounds. U.S. short ton is 2000 pounds and the standard U.K. long ton is 2240 pounds.
Wrenches manufactured in metric unit sizes to use with metric fasteners.
Urbanized area in and around a major city. The metropolitan area may overlap county and state boundaries and may encompass a city, its suburbs, and the towns and rural areas within the orbit of its social and economic influence.
One or more counties having a population of at least 50,000. A Consolidated Metropolitan Statistical Area (CMSA) is an area with two or more Primary Metropolitan Statistical Areas (PMSA). A CMSA must also include at least 1 million people.
Balcony or low ceiling overhang just above the main floor and below the next story. In a theater, a mezzanine is the first balcony above the stage.
Number that indicates the relative heat retention properties of a mass.
see Mortgage Guaranty Insurance Corporation