Real Estate Glossary

Our glossary is the largest dictionary of real estate and construction terms on the Internet with almost 10,000 definitions.
Real Estate Glossary
Our glossary is the largest dictionary of real estate and construction terms on the Internet with almost 10,000 definitions.



 
Ca - Cal - Car - Cas - Ce - Cen - Ch - Cho - Cle - Co

Col - Com - Con - Cond - Cont - Coo - Cos - Cr - Cro - Cu


A break or split without complete separation.

Small valve opening to permit flow through.

1. The breaking down of heavier hydrocarbons by heat and pressure or by catalysts into lighter hydrocarbons of lower molecular weight, for example gasoline from petroleum.
2. Paint defect brought about by improper material mixtures.

Paint Used where a smooth surface is not desired, this paint develops an alligator skin texture once it is sprayed over a gloss base lacquer.

Support framework for lath and plaster on a vaulted ceiling.

Skill requiring manual ability.

Person who is skilled at a craft, which requires manual ability.

Architectural style, which evolved, near the turn of the century, as part of the Arts and Crafts movement.

Iron or steel rod, which holds blocks of stone together by having ends, bent at right angles to the length of the rod.

Any one of the various motorized, machines for lifting or moving heavy weights by use of a horizontal bean or movable projecting arm traveling on an overhead support. They are used on construction sites for many jobs.

The overhead structural support spanning the distance between the girders or the rails on the bridge crane. Crane Cab Seating area, attached to the bridge or trolley, for the operator of the crane.

Also called crane rails, this structural section supports the bridge crane.

Also called crane girders, this structural section supports the bridge crane.

Different types of jibs, which are the extensions that top a crane tower, making additional moving and lifting possible. The Saddle Jib, which is a horizontal extension positioned at a right angle to the tower has a hook attached to a trolley which moves along the length of the jib which changes the hook reach. Saddle jibs can be used for both distance and close loads. Greater lifting height can be obtained from the use of a luffing jib, which is a pivoting extension at the top of the tower, with a hook suspended from its end, which can be changed from close to vertical to close to horizontal. Fixed Luff jibs are permanently at a horizontal angle but can pivot at the tip of the tower. Its hook can be fixed to a trolley so it can either move along the length of the jib or suspend from the end of the jib.

Crane, which is not machine-powered and is operated by hand with a closed-loop chain, working like a pulley.

The structure on which the ends of a gantry or bridge crane ride.

Crane that is radio-controlled.

Use as a lifting device, of a backhoe bucket, with a cable or chain wrapped around the bucket teeth.

Mechanism, which converts between rotary and reciprocating motion with use of a lever, which has one end, attached to the outside diameter of a wheel, which goes around with the wheel when it is turned. A crank connected to a piston within a cylinder is attached to the other end of the lever. The motion of the crank end of the lever is changed into a reciprocating or sliding motion as the lever moves along with the wheel.

Crankshaft enclosure in a machine.

Pin, which attaches the connecting rod at the outer periphery of the crank.

Used in both machinery and piston engines, this rotating shaft with connecting rods attached, for converting between rotary and reciprocating motion.

Metal shaper with a crank pin on the main driving gear to drive the to drive the reciprocating arm.

A hole-like defect.

Space between the ground and the first floor of a home, to allow for access to wiring, plumbing, etc., approximately four feet.

Heating system that works by accumulating heated air in the crawl space and by using fans to distribute the heated air.

Uneven texture of a paint surface, which can be caused by shrinkage while drying.

Also referred to as stress cracking, fine cracking which appears in the surface of paint, porcelain, etc.

see Certified Residential Broker.

Innovative financing arrangements to help sell a property.

Money a lender extends to a borrower who gives a commitment to repay the loan within a certain amount of time.

Form used to record information about an applicant seeking a loan.

The record of a person's current and past debt payments.

Insurance, which pays off a mortgage in the event of the borrower's death.

Maximum amount of money that can be loaned to a prospective borrower.

Degree of creditworthiness assigned to a person based on credit history and financial status.

Detailed account of an individual's credit, employment and residence history used by a lender to determine a loan applicant's creditworthiness. The three largest credit bureaus are Trans Union Corp., Equifax and Experian (formerly TRW).

Large companies that gather financial and credit information from various sources about individuals who have applied for credit.

Nonprofit cooperative organization providing banking and financial services such as home improvement loans, home equity loans and mortgages to its members.

A person or institution to whom a debt is owed.

To change in shape metals, materials, etc. as the result of stress, temperature, etc.

Low platform with wheels that is used for a person to lie on and slide under a machine or automobile.

Paint that runs together in small drops.

Slow but constant movement speed.

These square notches, which are evenly spaced at the top edge of a wall, are also called crenellations.

These square notches, which are evenly spaced at the top edge of a wall, are also called crenels.

Coal tar based chemical preservative used to treat wood items to protect them from decal and deterioration.

Trade name of an open-ended wrench with jaws, which adjust so that only one wrench is needed to fit a large number of fastener head of different sizes.

The peak of a ridge.

1. Framework of wooden or metal bars for support or strengthening, as in a mine.
2. Barrier that reduces the rate of flow in a river and also contains and stores floating logs.
3. Small dwelling or room or space.
4. Grain storage bin.

1. Placement of wood to keep a load from moving during transit.
2. Framework of timber lining and supporting a mineshaft.
3. Trenching a narrow area with a backhoe in a way so as to allow the areas on either side of the trench to remain untouched. The soil is placed in the trench close to the machine and removed as the trenching progresses.

Peaked structure, which diverts water at the juncture of a roof slope and a chimney or two roof slopes.

1. Mechanical clinching of sheet metal pieces for fastening purposes or to make material less flexible.
2. To evenly fold into corrugations.
3. Fold sheet metal for seams.

1. Tool shaped like a pair of pliers, which is used to make corrugations in the end of a sheet metal duct to reduce its size.
2. Tool that is used to squeeze an electrical connector tightly around a conductor.
3. Tool used to clinch metal studs or corner beads in place without additional separate fasteners.

Short stud used, in wall framing, between a top plate and a header or a sill and a sole plate.

Work scheduling where all major jobs are laid out in a diagram to show the proper sequence of work and the necessary time required for each, providing a visualization so that indications can be made to show which operations are critical to others.

The stage in temperature and pressure at which the liquid and vapor phases of a substance are equal.

The minimum pressure needed to liquefy a gas at its critical temperature.

Return to Top