Real Estate Glossary

Our glossary is the largest dictionary of real estate and construction terms on the Internet with almost 10,000 definitions.
Real Estate Glossary
Our glossary is the largest dictionary of real estate and construction terms on the Internet with almost 10,000 definitions.



 
Ta - Tar - Te - Ter - Th - Ti - To - Tr - Tre - Tu


A surveying tool used in precision work.

Measurement unit of heat equal to 100,000 Btu.

Relating to heat.

A factor specifying the expansion and contraction of a material as temperature rises and falls.

A material that allows heat to flow through it

A material that resists the passage of heat.

A substance of sufficient density to absorb heat, often used in passive solar heating systems.

An industrial process where metal is melted and sprayed onto a surface to form a coating.

A thick copper wire with a sensor on the end, which cools and prevents the flow of gas to the burner if the pilot light goes out.

Electricity produced by heating two different metals that are touching.

A device for measuring temperature.

Instrument which measure the amount of heat in the air by the expansion f a liquid in a graduated glass tube with a reservoir bulb at one end. Alternately, by use of a bimetallic strip which moves the indicator on a scale when heat causes the two metals to expand at different rates. Normally used for outdoor temperatures.

A type of plastic, hard when cool, that is easily softened by applying heat.

Electrical wire with a thermoplastic covering. Designated as type T wire.

Material that can be softened a single time by heat. After one heat application, the substance becomes a heat resistant material.

Material that can be softened a single time by heat. After one heat application, the substance becomes a heat resistant material.

Movement of fluid induced by heating. The fluid expands as it is heated and is forced through the system.

A switch using a bimetallic strip that reacts to changes in temperature. Thermostats are used to regulate heating and cooling systems by switching the heating/cooling on or off as temperature changes.

The connection of plastic fittings by melting at the joints.

Device used to regulate the point at which the burner for the water heater is activated.

A concrete slab that is thicker at the perimeter to support the walls of the structure.

Also called a feeler gauge, this series of precision thickness, metal blades is used for measuring small gaps, with each blade being marked with the thickness in thousandths of an inch.

Market in which there are comparatively few bids to buy or offers to sell real estate. The term relates to a single investment or to a particular investment market, such as the real estate market. In a thin market, buying or selling a few homes can impact disproportionately. Price volatility is generally wider than liquid markets.

A hinge shaped like a T, typically used for decorative purposes in period houses.

A petroleum-based solvent used for thinning and removing oil-based paint.

One who is not directly involved in a transaction or contract but may be involved or affected by it.

Transaction where the lender has another institution originate all or part of a mortgage.

A gauge used form checking the accuracy of a threaded component.

Spiral grooves cut into a fastener or component to facilitate connection with other grooved items. Nuts and bolts are examples of threaded fasteners.

A file with a triangular blade, used for work in inaccessible spots.

An electrical plug with two flat prongs and one round one (used as a ground). Typically used with high current devices such as refrigerators.

Switch device, which uses two switches to allow an outlet or light to be activated from either switch.

A valve with a single inlet and two outlets. The valve can be set so that either outlet is open.

An electrical system using two hot leads and one ground. Typically used for 240-volt service.

1. The entrance to a building or room.
2. A wood or metal strip over an exterior door sill.
3. A limit.

Levels of airborne concentrations of chemicals, used to determine safety limits.

Depository institution, such as mutual savings banks. If organized as mutual associations, depositors are shareholders. They provide mortgages.

A constriction in a passage.

Total drying of a painted surface.

The extent of an area illuminated by a given light fixture.

The application of force in one direction.

Concrete reinforcement poured under a pipe where a direction change occurs. The block supports the pipe and prevents it from moving under the force of the moving liquid inside.

A screw with a large head, designed to be tightened by hand.

Return to Top